Processes Operated;
H.V.O.F - High Velocity Oxy Fuel Spraying sometimes known as continuous detonation gun.
Plasma Spraying - particularly useful for spraying ceramic materials.
Arc Spray
Thermospray.
Wire Spray.
Spray Fuse.

Coating Properties;
The most common use for thermal spray coatings is WEAR and CORROSION RESISTANCE but the following can also be provided;
ERROSION RESISTANCE.
FRETING RESISTANCE.
CONTROLLED WEAR ( abradable seal)
PART BUILD UP.
HIGH FRCTION PROPERTIES.
LOW FRICTION PROPERTIES, PTFE TYPE COATINGS.
RELEASE PROPERTIES.
THERMAL CONDUCTIVITY.
THERMAL INSULATION.
ELECTRICAL CONDUCTIVITY.
ELECTRICAL INSULATION.
CLADDING APPLICATIONS.
SEA WATER ANTIFOULING APPLICATIONS
and others.

SERVICES OFFERED.
Coating Consultation.
To aid the customer decide the optimum solution for his application. Metalurgical analysis.
Complete part supply
One stop shopping to minimise handling costs.
Part Preparation.
Pre machining where required to prepare the component for coating.
Coating.
Good choice of materials and processes available with technical backup.
Densification of Coatings.
We are able to provide 100% dense coatings for use in corrosive environements or where very fine surfaces are required.
Finish machining.
Diamond grinding of hard materials and finish polishing available for a wide range of parts.
Inspection.
Parts are inspected according to customer requirements under our ISO 9000 system.
Metallographic Examination.
Metallographic examination is available for analysis of customer parts and as an aid to quality control.
Part shipment/ Export.
Experienced transport network used for collection and delivery of critical components.
Impact Finishing.
Glass bead blasting and shot blasting of parts from small to large sizes is available.